Come collocare le carte nel caricatore?

  1. Press on the sides of the card feeder and then lift it out of the printer.
  2. Turn over the card feeder to access the bottom.
  3. Drop the plate and insert the cards. Perform the operation as often as you like to obtain the required number of cards (feeder capacity: 100 maximum in 0.76 mm (30mil)).
  4. If necessary, adjust the handle from right to left depending on the thickness of the cards used, from 0.25 to 1 mm.
  5. Put the card feeder back in the printer. A CLICK indicates that the feeder is correctly fitted into the printer.